top of page

Portable Release and Drop Device

FLiFLi AirDrop is a portable drop device that can be attached to drone. AirDrop body and remote control can send and receive data by interchanging one's Identification Number(ID) which follows wireless communication rule. It works in high-class operating system, and it can be activated with remote control which is included in the package. AirDrop is designed to provide a light weight and easy-to-use dropping experience. And it is much easy and convenient to equip.

Carefully read quick guide before using the AirDrop. Using the AirDrop increases the load on the drone and quickens battery drainage. AirDrop is not recommended for novice pilots or if you are inexperienced in flying Phantom series. Refrain from hanging the objects that are too heavy for the drone. Reduce the flight speed, and avoid sudden movements.

FLiFLi AirDrop Quick Start Video

simbol_1.png

Phantom can stably carry about 300g of weight.

Depending on the type of drones (lifting force), the maximum load capacity may vary.

simbol_2.png

AirDrop guarantees a working distance of 1 km.

In the distance of more than 3 km, the probability of operation will decrease.

simbol_3.png

It doesn't disturb sight of camera installed on drone.

simbol_4.png

Multiple AirDrops can be used at the same space.

However, AirDrops will not work if more than one persons press the buttons on the remote control simultaneously. When more than one persons press the buttons on the remote control in sequence, all the AirDrops will work.

simbol_5.png

It operates independently without having to sync by connecting it with a drone through cable. (separate remote control provided)

simbol_6.png

Three seconds is enough to enjoy AirDrop.

Two steps to enjoy it.
① Attach bracket to drone.

② Place AirDrop to bracket.

Three Secconds Installation Video

Body and Remote control

Size

Body: 2.7 x 10.5 x 7.6 cm (1.07 x 4.14 x 3.00 inches)
Remote: 2.8 x 9.5 x 2.8 cm (1.10 x 3.75 x 1.10 inches)

Weight

Body: 104.9 g (3.7 ounce)
Remote: 29.8 g (1.05 ounce)

Bracket parts

Size

A Type 3.6 × 17.5 × 8.0 cm (1.42 × 6.89 × 3.15 inches)
B Type 3.6 × 17.4 × 7.5 cm (1.42 × 6.85 × 2.95 inches)
S Type 4.2 × 17.2 × 10.3 cm (1.64 × 6.77 × 4.06 inches)
G Type 4.2 × 17.0 × 10.4 cm (1.64 × 6.69 × 4.09 inches)

Weight

A Type 19.3 g (2.31 ounce)
B Type 19.3 g (2.31 ounce)
S Type 21.3 g (2.46 ounce)
G Type 21.3 g (2.46 ounce)

Detail

① Power button ② Power and operation button ③ Signal LED ④ Steel pin (hook) ⑤ Antenna ring

① Charging socket ② Reset button ③ Steel pin (hook) ④ Antenna ring

① Joint part ② Power button ③ Signal LED

20190425_flifli_airdrop_pin_700px.png

AirDrop pin (hook)

bottom of page